12Town - The online Community for the RV-12
Builders and Pilots of the RV-12 are encouraged to participate!
For Sale (19)
| Discussions | Replies | Latest Activity |
|---|---|---|
 ProgressGot my cowling, engine mounts, and fuel module today. This will keep me busy for a while and make some real progress. Started by Donald Lee Schwanke |
1 |
Mar 8 Reply by Brenda Smith |
 RV12 for $39k!This is an add on to Ron's excellent point for $37k RV12 discussion. You can build a great glass panel today for a fraction of the avionic… Started by Rahul Saini |
5 |
Feb 8 Reply by Donald Lee Schwanke |
Bigger is BetterFor those like me that don't pay much attention to the details, there is a symbol below the photos on this site, when you click on that it… Started by Donald Lee Schwanke |
0 | Dec 31, 2011 |
Rudder cable travelCould someone please tell me the full travel of the rudder cables, block to block at the attach pin on the rudder horn on the rudder pedal… Started by theodore clark farmin |
0 | Dec 26, 2011 |
 Warp Drive Prop Torque BoltsThis is complicated but I'll try to explain. When adjusting the pitch on my three bladed prop. I noticed the two inside bolts on the blade… Started by Ronald A. Russ |
1 |
Dec 7, 2011 Reply by Brenda Smith |
Oil Pressure Sender On Viking engineI recently had an oil pressure alarm go off at 5m feet. It sure gets your attention. Oil pressure was jumping from 60 to 110 then back to 7… Started by Ronald A. Russ |
0 | Dec 7, 2011 |
 Interior PiantingAny suggestions on painting of the canopy and interior? Type and color of paint. Brenda Started by Brenda Smith |
3 |
Nov 28, 2011 Reply by Brenda Smith |
N97HV RV12 First FlightI'm headed out to CZL to do work on my list of things that need to be addressed. One is the hard to reach rudder peddles. When I get home… Started by Ronald A. Russ |
5 |
Oct 27, 2011 Reply by Larry Geiger |
Performance on VAFI have decided not to publish the specs of my Viking RV12 on VAF. Whatever you publish on that site is going to be criticized by the usual… Started by Ronald A. Russ |
7 |
Oct 27, 2011 Reply by Larry Geiger |
Incorrect labeled Part ReceivedPage 32-08, the F-1261 shows a 7" UHNW part to be modified into 4 each 1 1/2" pieces. We received a 6" X 3/4" piece of angle. Has anyone el… Started by Brenda Smith |
1 |
Oct 26, 2011 Reply by Brenda Smith |
© 2012 Created by 12Town Admin.
