12Town - The online Community for the RV-12

Builders and Pilots of the RV-12 are encouraged to participate!

Question regarding the light kit. Did anyone complete the wing kit and then put in the light kit or light kit before finishing the wing skin?

Open for suggestions?

Tags: Light, kit

Views: 42

Reply to This

Replies to This Discussion

It is not easy no matter when you do it.  I did it before I closed out the wing ends, made it a lot easier, but still was quite tedious.  Think out the sequence a bit, I had to drill rivets and take some parts back out to get it in the proper sequence.  Patience and it will eventually all go in there right.

RSS

© 2012   Created by 12Town Admin.

Badges  |  Report an Issue  |  Terms of Service