12Town - The online Community for the RV-12

Builders and Pilots of the RV-12 are encouraged to participate!

Videos

  • Add Videos
  • View All

Events

Blog Posts

David

Matco hubs and valve stem

Posted by David on January 23, 2012 at 9:08am 0 Comments

Has anyone had issues putting the washer and nut on the tub valve stem?
I have one wheel together, but the other one doesn't have enough thread for the nut to bite.

Ronald A. Russ

Prop Pitch on RV12 Viking

Posted by Ronald A. Russ on November 25, 2011 at 7:45pm 1 Comment

Flew the RV12 Viking for 2.1 hours today.  Started out with a pitch of 13.5 degrees.  Ran full throttle at an average of 5,600 RPM going North, South  East West for about three minutes in each direction.  I flew until there was no longer an increase in speed.  Averaged altitude was 5,100 MSL.  All speed were recorded in each direction and average out to 135.5 MPH.  Coolant temp stayed around 200 degrees f.

Ran second test with a pitch of 15 degrees.  RPM averaged out to 5,300. …

Continue
Ronald A. Russ

Return Line

Posted by Ronald A. Russ on November 20, 2011 at 8:56pm 0 Comments

Brenda:  Use the existing 1/4 return you installed going to the fuel tank.  You shorten the forward line in the cockpit area and connect it to the manifold.  If you can email me at russra@windstream.net.  Its easier than trying to go through 12 town every time I email.  Ron

Ronald A. Russ

Flying the RV12 Viking Today

Posted by Ronald A. Russ on November 19, 2011 at 8:32pm 1 Comment

Before flying today I took two 5 gallon fuel containers to my local Kroger fuel station.  Got my .03 discount and purchased 10 gallons at $3.17 for 87 ethanol.  Topped off airplane and prepared to fly.  Takeoff is always exciting as by the time I have full throttle I'm in the air.  I love it when I look down at the terminal about 250 feet above it and look at the guys standing outside watching and listing to my takeoff.  Its very quiet.  I cruised over five of the local airports at 4500 msl…

Continue
 

Your Material Needed!

Please post your pictures and movies so we can all enjoy  and learn!

Sign up once to become a member. Anyone can browse; only members can add content.

It is simple to add photos or videos.  At the bottom of the displayed photos you will find an "Add Photos" button.  Pressing it will allow you to add a photo from your computer.  At the bottom of the video area is an "Add Videos" button. Pressing that will prompt you for the YouTube address of your video. If you have any questions, contact us here.

Photos

Loading…
  • Add Photos
  • View All

Latest Activity

Profile Icon
Rahul Saini is now a member of 12Town - The online Community for the RV-12 2 hours ago
Profile Icon
Profile Icon
Brenda Smith replied to chuck peterson's discussion 'Electrical diagrams'
You should be still able to find a copy in the maintenance manual page 18-1 on Vans Web Site  
Wednesday
Profile Icon
Nicholas E. Dillon is now a member of 12Town - The online Community for the RV-12 Tuesday
Profile Icon
clint hoese replied to clint hoese's discussion 'RV-12 stabilizer tips'
Glad you like the tips !!  Let me know if you have any questions about installation I'll be glad to help. 
Tuesday
Profile Icon
Donald Lee Schwanke replied to clint hoese's discussion 'RV-12 stabilizer tips'
I just received mine today, they are just beautiful  Clint!
Tuesday
Profile Icon

RV-12 stabilizer tips

 After a long wait i have the kit for the horizontal stabilizer tips on the RV-12 if you are interested let me know and i will get a set out to you. the kit includes,2 ABS tips2 mounting platesall hardware required for mountinginstructions on how to mount them.249.95 plus 12.00 shippingthanks, Clint210 497-3801youngoak@yahoo.com…See More
Discussion posted by clint hoese Monday
Profile Icon

Matco hubs and valve stem

Has anyone had issues putting the washer and nut on the tub valve stem?I have one wheel together, but the other one doesn't have enough thread for the nut to bite.See More
Blog post by David Monday
Profile Icon
Finish Kit arrived last week and putting the 12 on legs.
Status posted by David Monday
Profile Icon
Photos posted by David Monday
Profile Icon
ThumbnailThumbnail
robert burke and JIM GIESEN joined 12Town - The online Community for the RV-12 Monday
Profile Icon
Profile Icon

Sebring 2012: Ron Russ Viking RV12

Interview with Ron Russ at Sebring Light Sport Expo. Ron flew in his new Viking powered RV-12 aircraft and displayed it at the Viking Aircraft Engines booth.
Video posted by 12Town Admin Sunday
Profile Icon
chuck peterson replied to chuck peterson's discussion 'Electrical diagrams'
Donald, My e-mail is copeterson6@gmail.com. Thanks. Chuck
Saturday
Profile Icon
Donald Lee Schwanke replied to chuck peterson's discussion 'Electrical diagrams'
Glad you joine the Viking famile, congratulations!  I hope to get mine very soon. I have an electronic copy of the wiring diagram you asked for, send me your email address and I will forward it to you.
Saturday
Profile Icon

Electrical diagrams

Does anyone out there have an electrical schematic for the RV 12 using the old ( Dynon 180 ) avionics package? Vans are not shipping the new sky view system and will not ship the old system. Alas, I need help.    Chuck     I picked up my Viking Thursday.See More
Discussion posted by chuck peterson Jan 21

Notes

12Town: Information & FAQ

This site just went "live" on July 16 - so you should consider yourself a founding member!

 

12Town is an online community for active builders and pilots of the Vans Aircraft RV-12 light-sport aircraft.  Its purpose is to promote and share the activities of the builders and flyers of this wonderful aircraft. We are not affiliated with Vans Aircraft. Members are encouraged to post pictures, videos and stories that would be of value to…

Continue

Created by 12Town Admin Jul 16, 2011 at 9:43pm. Last updated by 12Town Admin Jul 17, 2011.

 
 
 

Members

  • Rahul Saini
  • 12Town Admin
  • Nicholas E. Dillon
  • clint hoese
  • chuck peterson
  • Brenda Smith
  • Donald Lee Schwanke
  • David
  • robert burke
  • Tom Delaney
  • JIM  GIESEN
  • Thomas Stose
  • Dick Gossen
  • Maurits Dekker
  • Larrie H. Yeagley
  • Randy Smith

Forum

chuck peterson

Electrical diagrams

Started by chuck peterson in Building Mods. Last reply by Brenda Smith on Wednesday. 4 Replies

Does anyone out there have an electrical schematic for the RV 12 using the old ( Dynon 180 ) avionics package? Vans are not shipping the new sky view system and will not ship the old system. Alas, I…Continue

clint hoese

RV-12 stabilizer tips

Started by clint hoese in Building Mods. Last reply by clint hoese on Tuesday. 2 Replies

 After a long wait i have the kit for the horizontal stabilizer tips on the RV-12 if you are interested let me know and i will get a set out to you. the kit includes,2 ABS tips2 mounting platesall…Continue

12Town Admin

Plexiglas Rear window (replaces factory Lexan)

Started by 12Town Admin in 3rd Party Products or the RV-12. Last reply by Torsten Leibold Jan 3. 6 Replies

 Carl Eldridge (cpecom02@hotmail.com) makes Plexiglas rear windows for the RV-12.  The benefit is that gasoline won't damage this (Lexan can be ruined by even a small amount!)  I understand the price…Continue

Donald Lee Schwanke

Bigger is Better

Started by Donald Lee Schwanke in For Sale Dec 31, 2011. 0 Replies

For those like me that don't pay much attention to the details, there is a symbol below the photos on this site, when you click on that it blows the photo up to where you can really see it  Try it,…Continue

© 2012   Created by 12Town Admin.

Badges  |  Report an Issue  |  Terms of Service